silver2kParticipantOctober 20, 2015 at 09:48Post count: 9OverKillParticipantOctober 20, 2015 at 10:17Post count: 19
Can you please take a better picture of the bottom of the PCB with more lighting? It looks like there might still be solder in the joint and maybe it did not adhere to the connector properly.silver2kParticipantOctober 20, 2015 at 10:22Post count: 9
Hi, yes. I will take a photo tonight.
There is definitely solder still in the hole on the PCB. I took a look to see if it would be a simple fix. Unfortunately with the switches on the plate it was not.
Thank you for your help.silver2kParticipantOctober 20, 2015 at 13:56Post count: 9
This is the clearest photo I could get. Will you be repairing this under warranty? I really want this keyboard and can’t order it anywhere else. This is a fantastic keyboard other than this issue.Austin BristerParticipantOctober 21, 2015 at 04:10Post count: 24adamyonkParticipantOctober 21, 2015 at 06:52Post count: 3
Slightly unrelated, but is it important to completely close the board openings for the keys with solder? I’m a soldering novice.adamyonkParticipantOctober 21, 2015 at 06:55Post count: 3
Maybe not. I was going off of the build guide, seems like they aren’t.OverKillParticipantOctober 21, 2015 at 11:24Post count: 19
It looks like the FRiEQ cables from Amazon will work well if you want to buy your own cables. They are the same as the Monoprice cables except they have a braided sleeve. Also I am still waiting to hear from Massdrop about cable replacements for those who purchased the Infinity ErgoDox there.OverKillParticipantOctober 21, 2015 at 11:28Post count: 19
It is not required but is preferable. Filling the holes with solder will insure that there will be no connectivity issues with the switches. In the build guide Alex did not solder all the switches with solder in case he needed to de-solder them for more pictures/troubleshooting.WalmsParticipantOctober 21, 2015 at 12:37Post count: 8
Thanks for all the work you are putting into the USB cable problem. Both the cables you have recommended don’t ship internationally at a reasonable price.
Are there any things to look for, if I am looking to source one closer to home ?
I’m part of the Massdrop order and while my order has not arrived, I’m wanting to get a new cable before I put it together.
ThanksOverKillParticipantOctober 21, 2015 at 14:43Post count: 19
daniel.walmsley from the MD comments section suggested this one for international shippers:
I would assume they should work fine 🙂WalmsParticipantOctober 21, 2015 at 16:11Post count: 8Austin BristerParticipantOctober 22, 2015 at 04:55Post count: 24
Just curious of the pictures you asked me to take reveal anything about why my USB receptacle isn’t functioning?silver2kParticipantOctober 22, 2015 at 07:56Post count: 9
Any update on the micro usb connector issue and how this will be supported? I have not heard by from Massdrop or Input Club yet. Slightly anxious, as my keyboard is useless. I can’t even attempt to repair it as all of the switches are on and the backplate blocks it.
The forum ‘Infinity ErgoDox’ is closed to new topics and replies.