Home/Support/KLL/How to "turn off" flash mode?
How to "turn off" flash mode? 2016-07-03T03:18:19+00:00

Hello WhiteFox Forums Support KLL How to "turn off" flash mode?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • sciro
    Participant
    Post count: 3
    #3094 |

    Hi all,

    First off, thanks for KLL and the configurator, works great and I’m very happy with my keyboard/config.

    I am playing around with what button I should set to FLASH so I don’t have to press the hardware button all the time.

    The FLASH function works perfectly but sometimes I accidentally press the key combo (I’m experimenting with layouts/layers) and it’s dead until I reflash it with a working firmware.

    My question is: is there an easy way to cancel the FLASH mode and bring it back? I assume you can’t do it through key combos since the keyboard is essentially disabled. Am I able to “turn off” FLASH mode by pressing the dedicated hardware FLASH button on my keyboard or is there any other way (besides flashing a firmware of course)?

    Thanks for your time and help.

    Cheers,
    sciro

    littletinyfish
    Participant
    Post count: 32

    One way is just to un/re-plug the device.

    sciro
    Participant
    Post count: 3

    Ah you’re right, I just tried it. Don’t know why I didn’t think of that, thanks a lot!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.