Home/Support/Keyboards/Infinity 60%/Rev 1.01B board – Bottom row not working
Rev 1.01B board – Bottom row not working 2016-05-16T13:08:32+00:00

Hello WhiteFox Forums Support Keyboards Infinity 60% Rev 1.01B board – Bottom row not working

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • rshuck
    Participant
    Post count: 2
    #2683 |

    I am stumped by this problem I am having with the Rev 1.01B (MD) 60% Hacker layout board that I built a while back. The space bar has never worked properly, and I have discovered recently that the entire bottom row does not work, including the last key on the right on row 4. I can upload new bins to it fine, but nothing is working down there no matter what I do. I tested with a multimeter and it looks like everything is working as it should at the switches, etc. Is there something I am missing?

    rshuck
    Participant
    Post count: 2

    I fixed it. In case anyone sees this in the future with the same issue, I ran a jumper wire from PTD7 to the bus side of D60 and all is fine now.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.